Lids & Spacers

Lids & Spacers

Lids and spacers are most often used with boxes, pallets and collars and are normally made from plywood. Boardic has produced lids and spacers for more than 20 years and has capacity for large volumes with short lead times. We have several different versions to choose from. Spacers are used to achieve several levels in one packing solution. The spacer separates the layers of loaded goods from each other when they are stacked on a pallet or in a container, and ensure that the goods do not shift during transport. They are also used as extra reinforcement on the top and/or bottom of the pallet.

  • Boardic Spruce plywood

    Boardic Lid Pine Plywood

    Boardic Lid Pine Plywood is our moisture resistant WBP glued lid made of pine plywood with plywood laths. Available in two sizes and can also be made to order. Would you like to brand the lid with your company’s logo? We can help you!

    Product sheet
  • Boardic Lid Pine Plug

    Boardic Lid Pine Plug

    Boardic Lid Pine Plug is our moisture resistant WBP glued lid made of pine plywood with a plastic plug. Our patent protected plug holds the lid firmly in place against the pallet collar and keeps the height of the lid to a minimum when handling empty. Available in two different sizes and can be branded with your company logo.

    Product sheet
  • Boardic Lid Birch plywood

    Boardic Lid Birch Plywood

    Boardic Lid Birch Plywood is our strong lid made of birch plywood. Birch plywood is a hard, wear resistant wood that withstands tough handling. Available with or without laths. The board consists of thin sheets of veneer laid alternately at 90 degrees, which are glued and pressed together under high pressure during heat treatment.

    Product sheet
  • Boardic Lid Paperedge

    Boardic Lid Paper Edge

    Boardic Lid Paper Edge is our moisture resistant WBP glued lid made of pine plywood with a paper edge. The paper lath holds the lid firmly in place against the pallet collar. The lid is available in two different sizes and can of course be branded with your company logo.

    Product sheet
  • Boardic Lid OSB

    Boardic Lid OSB

    The lid is made from OSB (Oriented Strength Board), which is a strong and proven board material. The two laths hold the lid firmly in place against the pallet collar. The lid is available in two different sizes and can of course be branded with your company logo.

    Product sheet
  • Boardic Spacer Pine Plywood

    Boardic Spacer Pine Plywood

    Boardic Spacer Pine Plywood is an intermediate layer that is most often used with a pallet and collar. Pine plywood is a strong and water resistant material that functions well in demanding transport conditions.

    Product sheet
  • Björkplywood

    Boardic Spacer Birch Plywood

    Boardic Spacer Birch Plywood is MR glued (moisture resistant) and is most often used as an intermediate layer with a pallet and collar. We have been making different types of spacers for over 20 years and have capacity for large volumes and short lead times.

    Product sheet
  • Boardic soft board

    Boardic Spacer Chipboard

    Boardic Spacer Chipboard is an intermediate layer of chipboard. The spacer is most often used with a pallet and collar. We are happy to mark the board with your company logo.

    Product sheet
  • Boardic Hardboard

    Boardic Spacer Hardboard

    Boardic Spacer Hardboard is an intermediate layer that is made from a completely organic material. The spacer is most often used with a pallet and collar. We are happy to mark the board with your company logo.

    Product sheet
  • Boardic Spacer OSB

    Boardic Spacer OSB

    Boardic Spacer OSB is an intermediate layer of OSB (Oriented Strength Board), which is a strong and proven board material. We are happy to mark the board with your company logo.

    Product sheet
2018-05-21T13:32:21+00:0018 May, 2018|